Sub-Zero Repair Redmond · WA (425) 905-2822

CL Series

Sub-Zero Classic Series: What Changed From BI

The Classic Series is Sub-Zero's current built-in generation, announced in October 2022, with model numbers that begin CL. It follows the BI and brings Split Climate cooling, a touch control panel and lighting that dims itself in a dark room. The tag inside the door tells the two apart; Sub-Zero Repair Redmond, (425) 905-2822.

Identify it

  • A model number beginning CL on the tag inside the door near the top hinge, or inside the left-hand door on a French door.
  • A touch control panel that sets temperatures, air quality and the ice maker.
  • LED lighting over the shelves and drawers that lowers its brightness when the room is dark.
  • A 48-inch French door: Sub-Zero's launch release calls it the brand's first at that width.
Announced
3 October 2022
Model prefix
CL, as in CL3650U or CL4850S
Shapes
Over-and-under, French door, side-by-side, column
Widths
30, 36, 42 and 48 in.
Finish
Stainless or panel-ready
Tag
Inside the door, top hinge; left door on a French door
Classic Series at a glance — Sub-Zero Repair Redmond, (425) 905-2822

The fifth Classic

Sub-Zero’s October 2022 release describes the CL line as the fifth time the Classic Series has been updated since the company began in 1945. The earlier built-in with BI model numbers is now filed under the same Classic name, which is why a phone call about “a Classic” starts with the tag rather than the word.

What a repair notices

Split Climate cooling. Sub-Zero’s name for the cooling system of the current line, which it presents as its answer to keeping food fresh longer. The touch control panel. Temperatures, air quality and the ice maker are set from one panel, with a Night Mode that turns the interior lighting down in a dim room. Air purification. A system Sub-Zero says scrubs ethylene and odour from the air every 20 minutes. ClearSight LED lighting. Overhead, shelf and drawer lights rather than a single lamp. Connectivity. The release lists Wi-Fi among the features of the new line.

This site documents no CL fault codes. With a CL, the diagnosis starts from what the panel shows and what the compartments actually read.

Warranty before anything else

A Classic installed recently may still be covered by Sub-Zero’s own warranty. Find the installation paperwork before booking any independent visit; while that cover runs, Sub-Zero’s customer care is the first call. Once it has lapsed, a CL is repaired from the same starting point as any other unit: the model and serial off the tag.

Panel-ready refrigerator column standing open with stocked shelves beside a drawer bank, a tool bag on the floor

Asked on the phone

Is a BI part of the Classic Series?
In Sub-Zero's own literature, yes: the BI guides are titled Classic, and its serial-tag page lists BI and CL together. On the phone, though, the prefix on the tag decides which generation is in the kitchen. Sub-Zero Repair Redmond, (425) 905-2822.

Classic Series that needs a technician?

Sub-Zero Repair Redmond · $89 service call, deducted once the repair goes ahead · on site 0800 to 2000 hrs, all seven days

Checked by
Dean Halvorsen
Bench
sealed systems and airflow
Trade
19 yrs
Card
EPA 608 certified
Revised
Overhead view of an open machine compartment with bagged relays, a multimeter and screwdrivers on the carpet beside it

Next step

Series, readout,
then a price

Give us the model off the tag and whatever the display is showing. When the fix is a clean condenser or a reset you can do yourself, you will hear that on the phone. When it needs a technician, the visit is $89 and it comes off the repair bill; the price for the work is in writing before anything is opened.

Sub-Zero Repair Redmond · on site 0800 to 2000 hrs, all seven days · calls taken 24/7